Hey.
I can not generate the code.
I'll try to explain everything in detail.
Apparently what is downloaded for free, will not work in hardware.
Only to get acquainted with the program, and only in VIN32 mode.
Everything is installed in accordance with what is explained in the section:
https://doc.embedded-wizard.de/getting-started-stm32f407-discoverers.
We do as suggested.
Test number 1:
Launch Embedded Wizard, then select the project "Hello Ward".
What we see in the main settings of the project;
In the line PlatformPackage ----------> STM.STM32.RGB565
In the line OutputDirectors ----------> .. \ .. \ Template \ GeneratedCode
In the Post Process line ------------------> ............................ (here is empty)
We want to look at the Prototype, Press, Strel + F5, and .......... we get an error.
Fatal error: The file 'C: \ Program Files (x86) \ Embedded Wizard 8.30 \ Platforms \ STM \ STM32 \ RGB565' does not exist
[11.4.2018 16:10:48] Fatal error: Can not create the prototyping environment. The currently selected platform package 'STM.STM32.RGB565' does not provide the necessary graphics engine module 'graphicsengine.ewi'. Possibly the necessary platform is 'STM.STM32.RGB565' is invalid.
We understand that the prototype is only for Win32. We are in the configuration, the PlatformPatskage on Tara.Win32.Rgb565A8, only this is suitable for us.
Click Strl + F5, and ................. everything is fine, application on the monitor screen.
Okay, but we need code for STM32F407-Discovery.
Go Build> Create this profile or just press F8. (As advised)
We see that everything is fine.
[11.4.2018 20:36:43] Information: Generating code for the profile 'STM32' ...
[11.4.2018 20:36:44] Information: Deleting outdated files ...
[11.4.2018 20:36:44] Success: Done.
Next, we need the firmware. Go to the \ Build directory.
Open StartBuildEnvironment.bat
make
make install
What do we see in the window .................?
C: \ Stm32 \ STM32F407-Discovery \ Template \ Project \ GCC> make install
makefile: 61: ../../../PlatformPackage/Rgb565A8/ewgfx.inc: No such file or directory
make: *** No rule to make target `../../../PlatformPackage/Rgb565A8/ewgfx.inc '. Stop.
This is the description of the launch, from your site !!!
What I tried to explain in the screenshots.
The fact that, Embedded Wizard Studio, generates only Win32 code.
Using the PlatformPatskage, the path;
c: \ Program Files (x86) \ Embedded Wizard 8.30 \ Platforms \ Tara \ Win32. What is there in the folder ?;
folder Index8
folder Rgb565A8
folder Rgba4444
folder Rgba8888
A compiler tries to find along the way;
c: \ Stm32 \ STM32F407-Discovery \ PlatformPackage \ ------------> folder Rgb565A8
Therefore, the compiler from the GCC package AWP gives an error.
After all, it is not possible to compile directly into the code for STM32 from the blanks for Vin32, without any specific software.
It is obvious.
Conclusion, or on the site the wrong description.
Or PlatformPatskage ----- Rgb565, for Embedded Wizard Studio, paid and not provided.